Welcome to our book review site go-pdf.online!
You may have to Search all our reviewed books and magazines, click the sign up button below to create a free account.
Turner Inspired
This title examines the ways in which Turner consistently strove to confront Claude's achievement and legacy.
Radio-frequency Dielectric Drying of Short Lengths of Northern Red Oak
Northern red oak boards, 1 inch thick by 4 inches wide by 24 inches long, were dried from an initial moisture content of approximately 80 percent of various final moisture contents by radiofrequency electrical energy. Drying occurred rapidly above the fiber saturation point, but slowed down considerably below this moisture content. With the drying system used in this investigation, the average moisture content could be reduced in 15 minutes from 80 to 25 percent. However, the level of degrade in boards dried to 25 percent or below was probably too high for many oak products in which honeycomb is an important defect. The results did suggest that radiofrequency drying has some potential as a predrying process to be followed by lower temperature drying. (Author).
Heating Times for Round and Rectangular Cross Sections of Wood in Steam
Heat sterilization of wood in various forms is currently receiving attention as a means of killing insects or pathogens to prevent their transfer from one region of the world to another in trade. One concern is the amount of time required to heat wood of various cross-sectional sizes and configurations to a temperature that will kill the insects or pathogens. Estimation of heating time depends on many variables. One estimation method uses heat conduction equations. This report reviews heat conduction equations for round and rectangular cross sections of wood and their validity through experimental data from the literature and experiments. The heat conduction equations used in this analysis apply only for steam as the heating medium the use of dry heat extends heating times beyond the estimates provided by the heat conduction equations. Tables are given for the time required to heat the center of cross sections of various dimensions to various temperatures at different heating temperatures in steam.
Equilibrium Moisture Content of Wood in Outdoor Locations in the United States and Worldwide
With relative humidity and temperature data from the National Oceanic and Atmospheric Administration, the average equilibrium moisture content for each month of the year was calculated for 262 locations in the United States and 122 locations outside the United States. As an aid for storage of kiln-dried lumber, a graph is presented for determining the reduction in equilibrium moisture content that results from heating air in an enclosed storage space above the temperature of the outside air.
Accelerating the Kiln Drying of Oak
Reducing kiln-drying time for oak lumber can reduce energy requirements as well as reduce lumber inventories. In this work, 1-inch northern red oak and white oak were kiln-dried from green by a combination of individual accelerating techniques--presurfacing, presteaming, accelerated and smooth schedule, and high-temperature drying below 18 percent moisture content. Results were compared with those achieved by conventional kiln drying. Drying time in the combined techniques procedure was reduced by more than 50 percent. The results for quality of the lumber were mixed. In most of the material, the quality was acceptable, but enough honeycomb was present to be of concern. (Author)
