Welcome to our book review site go-pdf.online!

You may have to Search all our reviewed books and magazines, click the sign up button below to create a free account.

Sign up

Proceedings of the Symposium on the Nickel Electrode
  • Language: en
  • Pages: 328

Proceedings of the Symposium on the Nickel Electrode

  • Type: Book
  • -
  • Published: 1982
  • -
  • Publisher: Unknown

None

Long Life Nickel Electrodes for Nickel-Hydrogen Cells: Fiber Substrates Nickel Electrodes
  • Language: en
  • Pages: 38
Development of a Lightweight Nickel Electrode
  • Language: en
  • Pages: 26

Development of a Lightweight Nickel Electrode

  • Type: Book
  • -
  • Published: 1984
  • -
  • Publisher: Unknown

None

A Study of the Deterioration of Nickel Spark-plug Electrodes in Service
  • Language: en
  • Pages: 34

A Study of the Deterioration of Nickel Spark-plug Electrodes in Service

  • Type: Book
  • -
  • Published: 1920
  • -
  • Publisher: Unknown

None

Specification for Nickel and Nickel-alloy Covered Welding Electrodes
  • Language: en
  • Pages: 25

Specification for Nickel and Nickel-alloy Covered Welding Electrodes

  • Type: Book
  • -
  • Published: 1969
  • -
  • Publisher: Unknown

None

Nickel Hydroxide Electrodes
  • Language: en
  • Pages: 440

Nickel Hydroxide Electrodes

  • Type: Book
  • -
  • Published: 1990
  • -
  • Publisher: Unknown

None

Long Life Nickel Electrodes for Nickel-Hydrogen Cells: Fiber Substrates Nickel Electrodes
  • Language: en
  • Pages: 38

Long Life Nickel Electrodes for Nickel-Hydrogen Cells: Fiber Substrates Nickel Electrodes

Samples of nickel fiber mat electrodes were investigated over a wide range of fiber diameters, electrode thickness, porosity and active material loading levels. Thickness' were 0.040, 0.060 and 0.080 inches for the plaque: fiber diameters were primarily 2, 4, and 8 micron and porosity was 85, 90, and 95%. Capacities of 3.5 in. diameter electrodes were determined in the flooded condition with both 26 and 31% potassium hydroxide solution. These capacity tests indicated that the highest capacities per unit weight were obtained at the 90% porosity level with a 4 micron diameter fiber plaque. It appeared that the thinner electrodes had somewhat better performance, consistent with sintered electro...

Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rods
  • Language: en
  • Pages: 14

Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rods

  • Type: Book
  • -
  • Published: 1989
  • -
  • Publisher: Unknown

None

Characterization of Cobalt-Dipped Nickel Electrodes with Fibrex Substrates
  • Language: en
  • Pages: 32

Characterization of Cobalt-Dipped Nickel Electrodes with Fibrex Substrates

Nickel electrodes using fibrous substrates have poorer initial utilization of the active material than those using conventional nickel sinter substrates. Previous investigators had shown that utilization can be dramatically improved by dipping these electrodes in a cobalt solution immediately after the electrochemical impregnation, before formation and cycling is carried out. The present study looked at the gas evolution behavior of dipped and undipped electrodes, impedance curves, and the charge-discharge curves to try to understand the reasons for the improvement in utilization. Impedance measurements under open circuit conditions indicate that some of the improvement is due to a reduction in the ohmic resistance of the surface layer of the particles, in agreement with earlier work. The charge-discharge curves suggest that there may also be an additional increase in the ohmic resistance of the surface layer of the undipped electrode during charging. Youngman, Carolyn A. and Reid, Margaret A. Glenn Research Center NASA-TM-106969, E-9726, NAS 1.15:106969 RTOP 297-55-00...