Welcome to our book review site go-pdf.online!
You may have to Search all our reviewed books and magazines, click the sign up button below to create a free account.
Self-Healing Phenomena in Cement-Based Materials
Self-healing materials are man-made materials which have the built-in capability to repair damage. Failure in materials is often caused by the occurrence of small microcracks throughout the material. In self-healing materials phenomena are triggered to counteract these microcracks. These processes are ideally triggered by the occurrence of damage itself. Thus far, the self-healing capacity of cement-based materials has been considered as something "extra". This could be called passive self-healing, since it was not a designed feature of the material, but an inherent property of it. Centuries-old buildings have been said to have survived these centuries because of the inherent self-healing capacity of the binders used for cementing building blocks together. In this State-of-the-Art Report a closer look is taken at self-healing phenomena in cement-based materials. It is shown what options are available to design for this effect rather than have it occur as a "coincidental extra".
Application of Photoactive Nanomaterials in Degradation of Pollutants
Photoactive nanomaterials have been receiving increasing attention due to their potential application in the light-driven degradation of water and gas-phase pollutants. However, to exploit the great potential of photoactive materials and access their properties requires fine-tuning of their size/shape-dependent chemical–physical properties, and on the ability to integrate them in photoreactors or to deposit them onto large surfaces. Therefore, the synthetic approach as well as post-synthesis manipulation could strongly affect the final photocatalytic properties of the nanomaterial. The aim of the present Special Issue is to report on the most recent progress towards the application of photoactive nanomaterials and nanomaterial-based coatings in pollutant degradation, paying particular attention to cases close to real application: scalable synthetic approaches to nanocatalysts, preparation of nanocatalyst-based coatings, degradation of real pollutants and bacterial inactivation, and application in building materials.
Second RILEM International Conference on Concrete and Digital Fabrication
This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Building for the Future: Durable, Sustainable, Resilient
This book presents the proceedings of the fib Symposium “Building for the future: Durable, Sustainable, Resilient”, held in Istanbul, Turkey, on 5–7 June 2023. The book covers topics such as concrete and innovative materials, structural performance and design, construction methods and management, and outstanding structures. fib (The International Federation for Structural Concrete) is a not-for-profit association whose mission is to develop at an international level the study of scientific and practical matters capable of advancing the technical, economic, aesthetic, and environmental performance of concrete construction.
Performance of Cement-Based Materials in Aggressive Aqueous Environments
Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deterior...
Third RILEM International Conference on Concrete and Digital Fabrication
This book gathers peer-reviewed contributions presented at the 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Loughborough, UK, on June 27-29, 2022. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Additive Manufacturing of Structural Electronics
Additive manufacturing, also called rapid prototyping or 3D printing is a disruptive manufacturing technique with a significant impact in electronics. With 3D printing, bulk objects with circuitry are embedded in the volume of an element or conformally coated on the surface of existing parts, allowing design and manufacturing of smaller and lighter products with fast customisation. The book covers both materials selection and techniques. The scope also covers the research areas of additive manufacturing of passive and active components, sensors, energy storage, bioelectronics and more.
