Welcome to our book review site go-pdf.online!
You may have to Search all our reviewed books and magazines, click the sign up button below to create a free account.
Fault-Tolerant Control of Nondeterministic Input/Output Automata
This book presents novel methods of fault-tolerant control theory in a discrete-event system framework. Nondeterministic input/output automata are used to model nominal and faulty technological systems. The main contributions are the following: Control design method for discrete-event systems Fault modeling technique for actuator, sensor and system internal faults and failures Off-line and on-line control reconfiguration based on trajectory re-planning and input/output adaptation. Two small size running examples are used to explain the developed methods. Experiments on a manufacturing cell demonstrate the application of these methods in a realistic environment. The state of the art is provided on methods for modeling, supervisory control and fault-tolerant control of discrete-event systems.
Reconfigurable Control of Nonlinear Dynamical Systems
This research monograph summarizes solutions to reconfigurable fault-tolerant control problems for nonlinear dynamical systems that are based on the fault-hiding principle. It emphasizes but is not limited to complete actuator and sensor failures. In the first part, the monograph starts with a broad introduction of the control reconfiguration problems and objectives as well as summaries and explanations of solutions for linear dynamical systems. The solution is always a reconfiguration block, which consists of linear virtual actuators in the case of actuator faults and linear virtual sensors in the case of sensor faults. The main advantage of the fault-hiding concept is the reusability of th...
Formal Methods in Manufacturing
Illustrated with real-life manufacturing examples, Formal Methods in Manufacturing provides state-of-the-art solutions to common problems in manufacturing systems. Assuming some knowledge of discrete event systems theory, the book first delivers a detailed introduction to the most important formalisms used for the modeling, analysis, and control of manufacturing systems (including Petri nets, automata, and max-plus algebra), explaining the advantages of each formal method. It then employs the different formalisms to solve specific problems taken from today’s industrial world, such as modeling and simulation, supervisory control (including deadlock prevention) in a distributed and/or decentralized environment, performance evaluation (including scheduling and optimization), fault diagnosis and diagnosability analysis, and reconfiguration. Containing chapters written by leading experts in their respective fields, Formal Methods in Manufacturing helps researchers and application engineers handle fundamental principles and deal with typical quality goals in the design and operation of manufacturing systems.
Event-based state-feedback control of physically interconnected systems
Event-based control is a means to restrict the feedback in control loops to event time instants that are determined by a well-defined triggering mechanism. The aim of this control strategy is to adapt the communication over the feedback link to the system behavior. In this thesis, a state-feedback approach to event-based control is extended to systems that are composed of physically interconnected subsystems. The main concern of this thesis is disturbance rejection in interconnected systems, which is supposed to be best accomplished by a continuous state feedback. This consideration leads to the idea that the event-based state-feedback system should approximate the disturbance rejection beha...
Control Theory of Digitally Networked Dynamic Systems
The book gives an introduction to networked control systems and describes new modeling paradigms, analysis methods for event-driven, digitally networked systems, and design methods for distributed estimation and control. Networked model predictive control is developed as a means to tolerate time delays and packet loss brought about by the communication network. In event-based control the traditional periodic sampling is replaced by state-dependent triggering schemes. Novel methods for multi-agent systems ensure complete or clustered synchrony of agents with identical or with individual dynamics. The book includes numerous references to the most recent literature. Many methods are illustrated by numerical examples or experimental results.
Performance and controller design for the synchronization of multi-agent systems
The analysis and design of control strategies for the synchronization of subsystems that are coupled over communication networks is the topic of this thesis. Typically, synchronization problems deal with the asymptotic behavior of networked multi-agent systems, where it is required that the states of the subsystems follow a common trajectory as the time approaches infinity. In contrast, this thesis focuses on strategies that do not only fulfill the requirement on asymptotic synchronization but also requirements on the transient behavior of networked multi-agent systems. Motivated by a growing number of applications where subsystems exchange their information by means of modern communication systems, the limits on the achievable performance of synchronization are studied for large teams of autonomous subsystems. In particular, control strategies that do not require any centralized coordination of the subsystems are developed.
Self-organizing control of networked systems
This thesis presents a novel distributed control paradigm for networked control systems in which the local control units of the subsystems exchange information, whenever this is necessary to fulfill an overall control aim. The local control units act in a self-organized way, which means that they adapt their communication structure depending on the current situation of the subsystems based on locally available information only. A new controller structure is proposed. The local control units are divided into three components fulfilling universal tasks to generate a situation-dependent communication structure: The feedback unit performs a local feedback by using local measurements to fulfill b...
Plug-and-play control of interconnected systems
In the networked control of interconnected systems, the communication network is primarily used for the exchange of measurements amongst the control stations. Plug-and-play control extends the usage of this network towards the exchange of models with the aim to automatically design control stations at runtime. Therefore, every subsystem is equipped with a design agent that initially knows only the model of its subsystem. To design a control station by a design agent, first, a suitable model of the subsystem that interacts with other subsystems has to be set up. Second, local design conditions have to be found that guarantee the adherence of the global control aim. If the designed control sta...
Modeling and Partially Coordinated Diagnosis of Asynchronous Discrete-Event Systems
This work presents a novel approach to modeling, analysis and diagnosis of coupled mechatronical systems with partially autonomous behavior and asynchronous state transitions. The systems under consideration are assumed to have the following properties: The internal interactions are immeasurable but reliable and the measurements relevant for diagnosis are given as a sequence of events. Asynchronous networks of input/output automata (I/O-automata) are developed to cope with partial coupling between components and to reduce the computational complexity of the diagnostic algorithms. I/O-automata are used to model those components. Their measurable inputs and outputs are modeled as control signa...
Fault-Tolerant Control of Deterministic Input/Output Automata
This thesis deals with active fault-tolerant control of discrete event systems modeled by deterministic Input/Output (I/O) automata. Active fault-tolerant control realizes three operating modes - nominal control, fault diagnosis and controller reconfiguration. A new fault-tolerant controller which autonomously ensures the fulfillment of the control aim, both, in the faultless and the faulty case is developed. The control aim is to steer the plant into a desired final state while guaranteeing the avoidance of illegal transitions. Corresponding to the three operating modes, the proposed integrated fault-tolerant controller consists of a tracking controller, a diagnostic unit and a reconfigurat...
